ZTDM 410LEAD EDGE 2 COLOR PRINTER diecutter MACHINE

FULL AUTOMATIC MIDDLE SPEEDCORRUGATED CARDBOARD MULTI-COLOR PRINTING DIECUTTING  MACHINE

前缘高速多色印刷模切机

Machine name

1200*2400 lead edge2colors printerDIECUTTER (ATTACHED SLOTTER) machine .

1200*2400型前缘四色印刷模切机

Quotation

Name

Note

Quantity

Price(USD)

Feeding unit

前缘送纸部

1. Front edge vacuum adsorption automatic  paper  feeding

前缘真空吸附自动送纸

2. 7 inches touch screen

7英寸触摸屏

3. Automatic tidying cardboard

纸板自动拍齐

4. Paper feed counter, set production quantity

送纸自动计数，可设定生产数量

5. Brush dust removal 送纸除尘

6. Servo lead edge，double air boxes drive

7. Machine clutch 

1

15000

Printing unit

1. printing roller hanging  plate device with pedal switch .

带有脚踏挂板

2.  Manual adjustment of the printing roller gap dial，electric phase adjustment

手动调整印刷辊间隙，触摸屏电动相位

3. Pneumatic inking, automatic ink distribution 

气动上墨，自动匀墨

4. hanging plate and wipe plate memory .

挂板/擦板记忆

5. walking alarm bell on per unit .

每组安全警铃

2

8500*2

Die cutting 

1.Differential Compensation Device差速补偿功能

2.With Die-cut roll repair device带模切胶垫修复功能

3. Touch screen to adjust the die cutting phase触摸屏调整相位

4.Handwheel quickly change roller gap手动调整模切辊间隙

5.attached computer slotting , which can be adjusted full automatically .

1

21000

Fob to tianjin sea port

53000USD

1.auto correction of the printing roller (auto back to zero)自动归零

2.electric to adjust printing roller left and right movement电动窜版

3.auto ink support自动供墨

Maximum speed（rpm）最大速度

220pcs /min

Working speed工作速度

150-180pcs/min

Max feeding size最大过纸尺寸

1200*2400mm

Minimum feeding最小送纸尺寸

300*600mm

Wall thickness（mm）墙板厚度

50mm

Gear thickness（mm）齿轮厚度

50mm

Max printing area（mm）最大印刷面积

1200*2400mm

Minimum slotting最小开槽

Positive type280*80*280*80mm

Negative type  180*180*180*180mm

LPI

网纹辊网线

220-280 optional

200, 220, 250, 280 or 220 250, 250, 280 for four colors machine are perfect choice.

Precision（mm）精度

Printing chromatic/topping accuracy±0.5,

Printing plate thickness（mm）印刷版厚度

4mm

Cardboard thickness（mm）纸张厚度

3-12mm

Air consumption(Nl/min)耗气量

1.2m³/min

FEEDING UNIT:送纸部

1、Machine clutch机器离合器

1) The electric control machine clutch is equipped with an alarm bell, and the alarm bell is continuously sounded while traveling to ensure the safety of the operators.电控机离合器装有警铃，在行驶过程中不断响起警铃，以确保操作人员的安全。
2) The drive shaft is equipped with a safety clutch to avoid malfunction and damage to the machine (when the machine is not locked, the main machine cannot start running).传动轴装有安全离合器，避免故障和损坏机器（当机器未锁定时，主机无法启动运行）。
3) Pneumatic interlocking device.气动互锁装置
4) The main engine motor start protection device.主机启动保护装置

2、Front edge paper feeding system前缘送纸系统

1) 7.5 kilowatt fan, suction assisted paper feeding, the air volume can be adjusted according to the degree of bending of the cardboard to ensure smooth paper feeding, and the air volume is controlled by frequency conversion.7.5度风机，吸力辅助送纸，可根据纸板的弯曲程度调节风量，保证送纸顺畅，风量采用变频控制。
2) Electric adjustment of side gear, PLC man-machine interface control, convenient and quick adjustment.侧齿轮电动调节，PLC人机界面控制，调节方便快捷。
3) Taiwan's ultra-resistant leading edge paper feed roller, durable and wear-resistant.台湾超耐磨前缘送纸辊，耐用耐磨。
4) Paper feed counter, set production quantity and touch screen display.进纸计数器，设置生产数量和触摸屏显示。
5) Brush dust removal除尘装置

3、Paper feed roller 导纸轴

1) The outer diameter is φ125mm.外径125
2) Seamless steel pipe, and balance correction.无缝钢管，动平衡处理
3) The lower feed roller is chrome plated.下辊镀硬铬
4) Manual adjustment of the paper feed roller gap dial, the adjustment range is 0-11mm.手动调整辊的间隙，范围0-11mm

4、Touch screen 触摸屏

A 7-inch touch screen is installed at the front of the paper feeding section to control the adjustment of the front baffle, host action, ink distribution control, printing plate control, realize one-key paper feeding mode, no repeated ink, no blank printing, no need to control lifting and falling plates, etc. Some tedious controls. The paper feeding department, printing department, die-cutting department, and separate zeroing control are generally adopted to test printing two cardboards to achieve qualified products.送纸段前部安装7寸触摸屏，控制前挡板的调整、主机动作、油墨分配控制、印版控制，实现一键送纸模式，无重复油墨，无空白印刷，无需控制升降落版等。一些乏味的控制。一般采用送纸部、印刷部、模切部、单独的归零控制，对印刷两块纸板进行测试，以达到合格产品。

PRINTING UNIT :印刷部

1、printing roller印花辊

1)  including the plate outer diameter φ410mm).包含印刷版直径410

2) Steel plate material, surface grinding, hard chrome plating.钢制，表面精磨镀硬铬

3) Balance correction, stable operation.动平衡处理，操作稳定

4) Ratchet fixed reel shaft.棘轮固定。

5) Full-format slab groove, suitable for 9mm hanging board.全幅面板槽，适用于 9mm 挂板

6) Assemble and unload the printed board, and the foot switch is electrically operated to produce positive and negative rotation.组装并卸载印刷板，脚踏开关采用电动操作，产生正向和负向旋转。

7) Manual adjustment of the printing roller gap dial, the adjustment range is 2-11mm.手动调整印刷辊间隙拨盘，调整范围为 2-11mm。

8）electric adjust printing roller left and right movement 电动左右移动印刷辊，微调

2. Printing press roller压力辊

1) The outer diameter isφ176. (Wall thickness 16)外径176，壁厚16

2) The surface of the steel pipe is ground and hard chrome plated.表面精研镀硬铬

3) Do dynamic balance correction, stable operation.动平衡处理

4) Manual adjustment of the printing press roller gap dial, the adjustment range is 0-11mm.手动调整和印刷辊之间的间隙和压力范围0-11mm

5) Manual adjustment of the paper feed roller gap dial, the adjustment range is 0-11mm.

3、Anilox roller网纹辊

1) The outer diameter is 200 mm. (thickness 25)外径200，内径25

2) 45# high-quality steel pipe, the surface is plated with hard winding treatment.45号钢制，表面镀层处理

3) The dots are consistent and the ink is evenly applied.网点一致，油墨涂抹均匀。

4) Extend the service life of printing plate and rubber roller.延长印版和胶辊的使用寿命。

5) Manual adjustment of the anilox gap dial.

4、Rubber roller胶轴

1) The outer diameterφis 200 mm. (Wall thickness 25)外径200，内径25

2) The surface of the steel pipe is wrapped with wear-resistant rubber.表面包裹抗磨橡胶

3) The rubber roller is specially ground in the middle and high, and the ink transfer effect is good.胶辊在中高处特别研磨，油墨转移效果好。

5. Paper feeding upper and lower rollers导纸上下轴

1) Upper roller: seamless tube with an outer diameter ofφ86mm, equipped with four paper feed wheels.上辊：外径φ86mm的无缝管，配备四个送纸轮。

2) Lower roller: seamless steel pipe with outer diameter ofφ156mm, surface ground, hard chrome plated.下滚轮：外径φ156mm无缝钢管，表面磨削，镀硬铬。

3) Manual adjustment of the paper feed roller gap dial, the adjustment range is 0-11mm.手动调整送纸辊间隙拨盘，调整范围为0-11mm。

6、Phase adjustment mechanism 相位调整

1) Planetary gear structure.行星齿轮结构

2) The printing phase adopts micro PLC control and electric digital 360 degree adjustment control (operation and stop can be adjusted).打印阶段采用微型PLC控制和电动数字360度调节控制（运行和停止可调）。

3) Horizontal position, electric adjustment adjustable distance±10mm, PLC control.水平位置，电动调节可调距离±10mm，PLC控制。

4) The printing plate roller adopts electric adjustment of the phase, the zeroing and plate adjustment speed is fast, and the plate adjustment accuracy is high.印版辊采用相位电动调节，调零和调整版面速度快，调整版精度高。

7、Ink circulation油墨流通

1) Pneumatic diaphragm pump, stable ink supply, simple operation and maintenance.气动隔膜泵，供墨稳定，操作维护简单。

2) The ink filter screen filters impurities.油墨过滤网过滤杂质。

8、Printing phase fixing device 印刷相位装置

1) Pneumatic brake mechanism.气动刹车装置

2) When the machine is separated or the phase is adjusted, the brake mechanism restricts the machine's rotation and maintains the original fixed position of the gear.当机器分离或相位调整时，制动机构限制机器的旋转并保持齿轮的原始固定位置。

DIECUTTING UNIT模切部

1. Roller diameter410standard template,模切辊直径410
2. Separate electric adjustment of phase相位独立电动调节
3. Automatically repair the rubber pad device, so that the rubber pad can be used thoroughly.自动修复脚垫装置，使脚垫能得到彻底使用。
4. Pneumatic plate lifting device, easy to load the plate, easy to operate, saverubber pads气动板片升降装置，装板方便，操作方便，节省胶垫
5.rubber pad roller linear speed compensation, automatic traverse device, improve die cutting accuracy.橡胶垫辊直线速度补偿，自动横移装置，提高模切精度。
6. Die-cutting is equipped with steel die-cutting fixtures, so there is no need to make templates for matching boxes.

模切配备了钢制模切夹具，因此无需制作匹配盒子的模板。