Automatic folder gluer machine

parameter

Automatic box gluing machine, composed of three parts: paper supply gluing department, folding part and counting and stacking output part Frequency conversion speed regulation, simple and reliable operation Automatic folding, automatic counting, automatic stacking output The maximum gluing speed is 150 m/min Foreign technology, domestic production

A. feeding unit

1 . The leading edge of the belt is used to suction and feed the paper, which is accurate and reliable (equipped with a wind shield, and the air volume can be controlled) 

2.The use of high-grade electromagnetic clutch and electromagnetic brake system, so that the paper supply section can be controlled separately, the operation is simple and reliable

3.  The left and right baffles control motor screw through the encoder, the length and width of the carton are automatically adjusted by the touch screen input, and the auxiliary remote control controls the fine-tuning, and are equipped with an automatic alignment device (below), which is easy to operate

4 .  Linkage with the folding part, frequency conversion speed regulation, paper supply speed 150 m/min

5.  The feeding section is equipped with an automatic pre-pressing wheel, which can assist the cardboardafter the printing machine to flatten the corrugated and reduce the size of the mouth (below)

6. The glue head adopts stainless steel to ensure the service life The rubber wheel is conventionally 25 mm and 30 mm wide, and can also be customized according to the actual situation of the customer The glue circulation system adopts a diaphragm pump circulation system, which is easy and quick to clean the glue head (below)

B .folding unit

1 .The main frame is made of heavy-duty square tubes, which are assembled and welded after precisiontreatment to ensure the stability of use.

2. After undertaking the paper feeding department, two auxiliarycreaser were added to make the carton forming effect better (below).

2The transmission wheels are all made of high-quality nylon, which greatly reduces the thermal expansion and contraction caused by the excessive temperature difference in the weather, so as to ensure the tightness of the belt.

3.The transmission belt adopts imported high-quality belt, which has high friction and long service life.

4.The differential design structure of the upper and lower belts can greatly reduce the scissor edge phenomenon caused by folding and conveying.

Cardboard size

C 、COUNTING AND STACKER

1 .  It adopts digital control, simple operation, reliable action, non-stop data input, automatic counting, and accurate output

2.  The carton is conveyed by belt, and the stacking speed is 150m/min

3.  It has the function of rectifying the deviation, and the deviation is adjustable

4.  Counting and pushing adopt pneumatic mode, the action is reliable, accurate and fast

D 、

1 .The mechanical installation covers an area of about 14 meters in length, 4 meters in width, and 1.9 meters at the highest point

2.The total weight of the machine is about: 5 tons

3 .Total power of power supply: 380V power cord about 1 2KW

 The motor details are as follows:

(1) The main motor of the folding part is 4KW, and the speed is regulated by frequency conversion

(2) The main motor of the counting and accumulation part is 2.2KW, and the frequency conversion speed regulation is adopted

(3) Folding amplitude modulation main motor 0.55KW gear reducer, two

(4) The main motor of the output part is 0.37KW and 0.25KW gear reducer, and there is one gear reducer motor each